READING THIS INSTRUCTION IS MANDATORY!
Failure to follow it may result in denial of support.

Pre-launch Setup

Automatic setup via BAT file

Use the included BAT file to simplify setup. Running it will partially automate the pre-launch configuration and let you skip steps 4–5 in the "Pre-launch Setup" section.

How to use:

  1. Download the BAT file
  2. Place it in a convenient location (not on the desktop)
  3. Run it as Administrator
  4. Wait for the script to finish and restart your PC
Important: The BAT file does not replace the entire guide — complete the remaining steps manually.

Manual Setup

  1. Download the loader archive. Password: 123
  2. Rename and place the archive in a convenient location (not on the desktop)
  3. Install required libraries and frameworks:
    • RuntimePack
    • DirectX
    • Microsoft Visual C++
  4. Uninstall antivirus, disable protection and remove anti-cheats (mandatory). Remove or disable virtual machines and sandboxes (optional). Also disable virtualization in BIOS and run: bcdedit /set hypervisorlaunchtype off. Then restart your PC
  5. Configure BIOS and Windows settings (optional):
    • Enable ASLR
    • Disable Secure Boot
    • Enable UEFI (if Legacy BIOS is used)
  6. Move the Start menu to the bottom (as default)
  7. Restart your PC after completing all steps

Cheat Launch Instructions

It's recommended to launch the cheat from a USB stick. Once the cheat is launched (before entering the game) — remove the USB stick.

First-time launch only

  1. Run the cheat
  2. Wait for the PC to automatically restart
  3. Proceed to step (2) of the main instructions

Main Launch

  1. Restart your PC
  2. Make sure the loader is completely closed
  3. Use a spoofer (custom or built-in)
  4. Launch the cheat loader
  5. Select EscapeFromTarkov
  6. Click "Launch Cheat" (loader will close automatically)
  7. Launch the game launcher and log in
  8. If you used a spoofer — you may need to enter a verification code
  9. Enter the game
  10. In the lobby, press F2 to inject
  11. Press Home or Insert to open the menu

What to do if you receive a HWID ban

Main Steps

  1. Select Escape from Tarkov in the loader
  2. Check "Enable spoofer" (works until reboot)
  3. Check "Clear traces"
  4. Log into a new account
  5. Play

Additional Tips

  • Don't visit sites using your main browser — use incognito mode and VPN
  • Don't open the game loader unless traces are cleared and spoofer is enabled
  • "Use previous configuration" = old hardware data. Don't enable it if you were banned

Additional Information